3

4.7 na osnovi 3 ocen uporabnikov

2
1
0
0
0
Zasnova

Dobro

Preprosta uporaba

Odlično

Opomba: ocene izdelkov lahko vsebujejo različice izdelkov. Nekatere različice izdelkov, storitve in/ali funkcije, ki so omenjene v ocenah izdelkov, morda niso na voljo v vseh državah.

Ocene uporabnikov: 3

0

EFFICACITé

LHP-1 06.09.2014 od MarCath (Francija) Preverjen kupec Preverjen

pour moi, un pare-soleil est absolument INDISPENSABLE sur un objectif, tant pour protéger la lentille frontale que des rayons obliques de la lumière (exploitation maximum de l'optique); très bonne fabrication mais prix stratosphérique !!!! à l'image de tous les accessoires Sony

Kakovost slike

Dobro

Značilnosti

Dobro

Zasnova

Dobro

Preprosta uporaba

Odlično

Prevod trenutno ni na voljo. Poskusite znova.

0

0

0

Does it fit other 49mm lens?

LHP1 16.02.2013  (ZDA)

This is really cool, I just wonder if it fits other NEX lens like E24? THX

Prevod trenutno ni na voljo. Poskusite znova.

0

8

0

Machined to fit hood

LHP1 31.12.2012 od RXIchiban (ZDA)

The LHP-1 lens hood is tailored to the RX1 with a bayonet mount that slips between the inner and outer barrels of the lens. It is machined into a rigid design that harkens to the old Voigtlander hood. The LHP-1 is best for preventing flares from incident light and fulfills this stated function. The rear vents of the hood allow illumination from the camera's built-in flash to function beyond 3 meters; however, within 2 meters, if the hood is attached, it will leave a shadow in the corner of built-in flash pictures. The closer the flash shot is, e.g., macro, the bigger the shadow will appear. Therefore, before taking flash pictures up close, either remove the LHP-1 or attach an external flash unit that sits high above the lens hood. For example, the Sony macro twin flash can be adjusted to illuminate a closeup subject without interference from the lens hood. In addition, as a result of the "sunken" bayonet mount, the hood cannot be flipped over to attach in reverse when the LHP-1 is not being used. It does not fit in the RX1's leather case, therefore, expect to pocket the hood during transport. The LHP-1 is a precisely machined hood with a custom fit to the RX1 that easily attaches and detaches. This lens hood is recommended for landscape photography and it is essential for panoramas.

Prevod trenutno ni na voljo. Poskusite znova.

41

2