Sonyjeva podpora

    ID članka : 00330289 / Nazadnje spremenjeno : 20.01.2026Natisni

    There are SLS-1A speakers that do not appear on the network

    Check the following:

    • Set up the IP address and firewall
    • With the Line-Array Speaker Manager application, you can set up a maximum of 30 SLS-1A speakers at a time. To set up 31 speakers or more, set up to 30 speakers, or use several groups for connecting to the same network.
    • Your computer and the SLS-1A speaker are not connected with an Ethernet cable. This is not required if you are connecting through a router.
    • Your computer and the SLS-1A speaker are not on the same network (they are in different IP address groups)
    • A router supporting DHCP is recommended, as it automatically assigns the IP addresses. (the SLS-1A speaker is configured to DHCP by default)

    • Registrirajte izdelek

      Pridobite dostop do vseh informacij, imejte izdelek vedno posodobljen in izkoristite odlične ponudbe

    • Skupnost Sony

      Obiščite našo skupnost ter delite svoje izkušnje in rešitve z drugimi Sonyjevimi strankami

    • Stik s podporo

      Obrnite se na Sonyjevo ekipo za podporo

    • Popravila in garancija

      Dogovorite se za popravilo, temu sledite ali se mu celo izognite