Imaging Edge logo
    Imaging Edge Mobile Plus

    Remote Shooting

    You can use the Imaging Edge Mobile Plus as a remote commander, and operate the camera from a distant location.

    • smartphone icon : smartphone operation
    • camera icon : camera operation
    1. cameraInstall the camera and turn on the power in advance.
    2. smartphoneOpen the Camera Screen on the Imaging Edge Mobile Plus, and select [Remote Shooting].

      The smartphone and camera are connected by Wi-Fi via Bluetooth, and the shooting screen of the camera is displayed on the screen of the smartphone.

      Camera Screen of the application. The "Remote Shooting" and "Camera Screen" at the lower middle of the screen are highlighted.
    3. smartphoneOperate the camera and shoot images on the shooting screen.
      The Remote Shooting screen of the application. The shooting screen is displayed in the upper half of the screen, and the operation button and information are displayed in the lower half. Below the shooting screen, there are C, D, I, J, and K. Below that, there is E , and at the very bottom, from the left, there are F, G, M, and L. At the top left of the shooting screen, there are A and B, and at the top right, there is H.
      • A. Return to Camera Screen.
      • B. Image acquisition in progress
      • C. AE locked
      • D. Media and media remaining
      • E. Operating panel : Select the desired item and set the value
      • F. MENU : Refer to "Menu settings" below
      • G. Shutter button
        Shutter button Single shooting
        Shutter button for continuous shooting Continuous shooting: If you slide to the left, you can fix the shutter button in pressed state.
        Red shutter button for video Start/stop shooting video
      • H. Rotate live view
      • I. Perform zoom-related operations
        • Step zoom magnification icon : Step zoom magnification
        • W/T: Perform zoom operations
      • J. Aspect ratio, still image size, remaining battery level
      • K. Mirror Mode, Location information acquisition
      • L. DISP : Switch over display mode
      • M. AEL : Perform AE lock
    • In the default settings, the captured image is saved in the memory card inside the camera, and the image converted to 2M (2 megapixels, approximately 2 million pixels) is transferred to the Imaging Edge Mobile Plus. From the camera menu (Network) → [Smartphone Connect] → [Remote Shoot Setting], you can change the save destination and size.
    • Videos captured by Remote Shooting are not transferred to Imaging Edge Mobile Plus.

    Menu settings

    You can set detailed items in menu settings. An example is given below. Depending on the camera, some items may not be supported.

    [Review Image]
    This is the setting for whether to display the captured image on the smartphone after shooting.
    [Location Information]
    Using the smartphone location information service, add location information to the review image and background transferred image. This can be used when review image saving is set to [On].
    When adding location information to images saved in the memory card of the camera, use [Setup] → [Location Information Linkage] on the Camera Screen.
    [Emphasized REC Display]
    The shooting screen can be emphasized during movie recording to provide a clear transition between shooting and standby.
    [Mirror Mode]
    The monitoring screen can be reversed horizontally. This is a convenient function when pointing the camera toward yourself and taking a picture.

    • Registrirajte izdelek

      Pridobite dostop do vseh informacij, imejte izdelek vedno posodobljen in izkoristite odlične ponudbe

    • Skupnost Sony

      Obiščite našo skupnost ter delite svoje izkušnje in rešitve z drugimi Sonyjevimi strankami

    • Stik s podporo

      Obrnite se na Sonyjevo ekipo za podporo

    • Popravila in garancija

      Dogovorite se za popravilo, temu sledite ali se mu celo izognite